Stainless Steel Wire Mesh

General Introduction of Stainless Steel Wire Mesh: Stainless steel wire mesh and stainless steel wire cloth products are
widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making,electronic, metallurgy
etc. Special size and specification are available according to customers requirement.

Materials of Stainless Steel Wire
Mesh: Material for weaving stainless steel wire mesh ( wire cloth ) is divided into Type 304, Type 304 L, Type 316 and Type
316 L. Type 304 is often referred to as "18-8" ( 18% chromium, 8% nickel ) with the basic stainless alloy mostly commonly,
utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated
temperature up to 1400 Degrees Fahrenheit.

Type 304 L is very similar to T-304, the difference being the reduced carbon
content for better weaving and secondary welding characteristics.

Type 316 Stabilized by the addition of 2% molydbenum,
T-316 is an "18-8" alloy. It has better resistance to pitting corrosion than the other chromium-nickel stainless steels
where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high
creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.


Type 316 L is very similar to T-316, the difference being the reduced carbon content for wire cloth weaving and
secondary welding characteristics.